Need help?Do you have a question about the Trane Sintesis Advantage CXAF 110 SE and is the answer not in the manual?
General| Model | CXAF 110 SE |
|---|---|
| Category | Chiller |
| Compressor Type | Screw |
| Refrigerant | R134a |
| Voltage | 400V |
Details on safety warnings, cautions, and general recommendations for safe operation and maintenance.
Explanation of the primary digits used in the unit model number for configuration.
Explanation of additional digits in the model number for specific features like power and freeze protection.
Checklists for mandatory pre-installation and start-up verification steps.
Overview of contractor responsibilities and installation requirements for the unit.
Guidelines for unit placement, required clearances, and safe lifting procedures.
Specific tasks assigned to the contractor during unit installation.
Procedures for levelling the unit and installing optional isolators for vibration reduction.
Recommendations for water treatment and details on standard vs. reverse water flow piping.
Guidelines for installing chilled water piping, valves, and pressure gauges.
Requirements for evaporator flow switches and minimum water volume for optimal performance.
Charts showing evaporator pressure drop based on water flow rates.
Diagrams of the optional pump package and associated pump performance curves.
Options for protecting the evaporator from freezing, including heaters, glycol, and draining.
Adjusting low refrigerant temperature setpoints and guidance on glycol concentration.
Guidelines for field-installed wiring, grounding, and electrical component safety precautions.
To Next Page