Need help?Do you have a question about the Trane SINTESIS ADVANTAGE CXAF 100 SSE and is the answer not in the manual?
General| Model | SINTESIS ADVANTAGE CXAF 100 SSE |
|---|---|
| Category | Chiller |
| Operating Voltage | 400V/3Ph/50Hz |
| Refrigerant Type | R134a |
| Sound Power Level | 85 dBA |
Detailed breakdown of each digit in the unit model number and its meaning.
Checklist for technicians before unit start-up, covering installation tasks.
Technical specifications for CGAF Standard Efficiency units.
Technical specifications for CGAF High Efficiency units.
Technical specifications for CXAF Standard Efficiency units.
Technical specifications for CXAF High Efficiency units.
Detailed instructions and warnings for safely lifting and moving the unit.
Importance of water volume for temperature stability and avoiding short cycles.
Options for freeze protection based on ambient temperature and glycol use.
Guidance on selecting glycol concentration for freeze protection.
Safety precautions for handling capacitors and discharging stored energy.
Warnings regarding pressurized refrigerant and high voltage during servicing.
Where to find electrical data like power input, amps, and short circuit rating.
General data for the Total Heat Recovery option on CGAF units.
General data for Partial Heat Recovery option on CGAF Standard Efficiency units.
General data for free-cooling options on CGAF units.
Checklist to verify installation procedures are completed before unit start.
Procedure to check supply voltage and ensure it meets installation section criteria.
Importance of establishing correct compressor rotation and phase sequence.
Importance of correct wiring for DSH compressor rotation and avoiding damage.
Steps for replacing a failed compressor, including oil and filter drier changes.
Steps and precautions for correctly replacing the BPHE evaporator.
To Next Page