To Next PageTo Next Page
Need help?Do you have a question about the Trane Sintesis RTAF 200 SE SN LN and is the answer not in the manual?
General| Category | Chiller |
|---|---|
| Cooling Capacity | 200 tons |
| Refrigerant | R-134a |
| Compressor Type | Screw |
| Model | RTAF 200 SE SN LN |
Highlights potentially hazardous situations that could result in death, injury, or property damage if not avoided.
Lists crucial recommendations for maintenance and service visits to prevent accidents and damage.
Specifies requirements for sizing, selecting, and installing power supply wiring and fused disconnect switches.
Highlights the importance of proper oil and refrigerant charge for unit operation and performance.
A checklist to verify all recommended installation procedures are accomplished before unit startup.
Ensures the supply voltage meets criteria and checks for proper range and imbalance.
Details the sequence of operations for starting the chiller, assuming no diagnostics or malfunctions.
Outlines the steps for preparing the unit for seasonal startup, including valve checks and auxiliary equipment.
Describes the procedure for short-term unit shutdowns for maintenance or repair.
Details the steps for taking the system out of service for an extended period, including leak testing and draining.
Guidelines for refrigerant handling, recovery, recycling, and minimizing emissions.
Instructions for identifying and replacing a dirty filter element based on temperature gradient.
Describes how to add oil to the motor cavity or suction line before installing the compressor.
Provides steps for oil charging when virtually all oil has been removed or after component servicing.
