Trane Sintesis RTAF 145 SE SN LN User Manual

RLC-SVX19G-GB
RTAF SE/HE/XE/HSS/HSE
R134a, R513A, R1234ze
Air-cooled
Helical-rotary chillers
300 - 1900 kW
Installation
Operation
Maintenance
Sintesis chillers are part of the Ingersoll Rand EcoWise™ portfolio
of products that are designed to lower their environmental
impact with next-generation, low global warming potential
(GWP) refrigerants and high effi ciency operation.
Original instructions

Trane Sintesis RTAF 145 SE SN LN Specifications

General

Category	Chiller
Cooling Capacity	145 tons
Refrigerant	R-134a
Compressor Type	Screw
Model	RTAF 145 SE SN LN
Voltage	400V

Summary

Introduction

Warnings and Cautions

Highlights potentially hazardous situations that could result in death, injury, or property damage if not avoided.

Safety Recommendations

Lists recommendations to observe during maintenance and service visits to prevent hazards.

Unit Description

Pre-Installation and Requirements

Inspection

Details the process of verifying the delivered unit is correct and inspecting for visible damage.

Storage

Installation Requirements

Lists general contractor responsibilities for installing RTAF units, including foundation, piping, and electrical connections.

Optional Features and Systems

Optional Integrated Pump Package

Optional Free-Cooling

Electrical and Control Systems

General Electrical Recommendations

Provides general recommendations for electrical installation, including wiring, grounding, and capacitor safety.

Tracer TD7 Operator Interface

Start-up and Maintenance Procedures

Pre-Start Checkout

Provides a checklist for verifying installation procedures and accomplishments before unit startup.

Unit Start Up Procedures

Periodic Maintenance

Outlines recommended weekly, monthly, and annual maintenance procedures for optimal chiller performance.

Integrated Pump Maintenance (Optional with Pump Package)