To Next PageTo Next Page
Need help?Do you have a question about the Trane Sintesis RTAF 140 SE SN LN and is the answer not in the manual?
Highlights hazardous situations that could lead to injury, death, or property damage.
Provides essential safety guidelines for maintenance and service visits to prevent hazards.
Details options for freeze protection including water pump, heaters, glycol, and drain circuits.
Details factory-mounted and tested hydraulic module components for optional pump packages.
Explains conditions for enabling free cooling based on ambient and water temperatures.
Critical safety warnings for working with high voltage and capacitors, including lockout/tagout procedures.
Description of refrigerant circuit components and the typical refrigerant cycle with state points.
Details on rotary screw compressor, motor, oil separator, and oil heater for proper operation.
Explains how to check unit configuration versus ambient conditions using the operating map.
Checklist to verify all recommended installation procedures are accomplished before unit start-up.
Procedures for checking supply voltage, imbalance, and motor rotation for proper startup.
Step-by-step process for daily unit startup, assuming normal conditions and proper pre-checks.
Procedures for seasonal startup, including valve checks, circuit preparation, and control verification.
Procedures for restarting the unit after a prolonged shutdown, ensuring proper system conditions.
Procedures for refrigerant conservation, recovery, recycling, and minimizing emissions.
Importance of proper refrigerant and oil charge for unit performance and environmental protection.
General