CG-SVX039C-GB
5
Sintesis Advantage Chillers CGAF and Heat pumps
CXAF are air-cooled scroll compressor units designed
for outdoor Installation. The CGAF units are cooling only
units and CXAF units are reversible and can work in
cooling and heating mode.
The units have two independent refrigerant circuits, two
or three compressors per circuit. Units are packaged
with an evaporator and condenser.
Each Unit is completely assembled, hermetic packaged,
refrigerant circuit factory piped, electrical components
wired, leak tested, dehydrated, charged and tested.
The chilled water inlet and outlet openings are covered
for shipment.
Units feature Trane’s exclusive Tracer UC800 Control
logic and controls. It monitors the control variables
that govern the operation of the unit. Control logic can
correct these variables when necessary to optimize
operational efficiencies, to avoid the unit shut down, and
keep producing the chilled or hot water.
These units come with various options and can be
customized depending on capacity, efficiencies, acoustic
levels, application requirements at the time of order
placement.
The unit received and its options can be cross-checked
with the serial and model number provided in unit
nameplate and description provided under unit model
number description provided in the manual.
Nameplates
The CGAF / CXAF outdoor unit nameplates are applied
to the exterior of the control panel. A compressor
nameplate is located on each compressor.
Unit Nameplate
The unit nameplate provides the following information:
• Unit model and size description
• Unit serial number
• Identifies unit electrical requirements
• Lists correct operating charges of refrigerant and
refrigerant oil
• Lists unit test pressures
Compressor Nameplate
The compressor nameplate provides following
information:
• Compressor model number.
• Compressor serial number.
• Compressor electrical characteristics.
• Utilization range.
• Recommended refrigerant.
Unit Description
To Next Page
Loading...
Need help?
General