page 16 XL1050 User Guide
Adding/Removing Z-Wave Devices (via XL1050)
Your XL1050 is designed to integrate seamlessly
with Nexia™ Home Intelligence as part of a
complete Z-Wave home automation system.
Adding Z-Wave Devices
1. From the HOME Screen, press MENU on
the XL1050 Control, then press NEXIA.
2. Press ADD DEVICE and follow the device
manufacturer’s instructions for setting the
Z-Wave device into learn mode. You will
have four minutes to set the device into
learn mode after pressing the ADD DEVICE
button.
Removing Z-Wave Devices
1. From the HOME Screen, press MENU on
the XL1050 Control, then press NEXIA.
2. Press REMOVE DEVICE and follow the
manufacturer’s instructions for setting the
Z-Wave device into learn mode. You will
have four minutes to set the device into
learn mode after pressing the REMOVE
DEVICE button.
Advanced Z-Wave Functions
Press ADVANCED for advanced Z-Wave
functions including unregistering your bridge
from Nexia or factory resetting your bridge.
To Next Page
Loading...
