Trane ComfortLink II XL1050 - Advanced Z-Wave Settings

page 18 XL1050 User Guide
Advanced Z-Wave Settings
Nexia’s ADVANCED SETTINGS screen contains
three very powerful functions. Each of these
functions is very specic and should be
approached with a measure of caution. They
cannot be “undone.”
Learn
This function copies a new Z-Wave network to
the bridge from another controller. In addition, it
removes all current devices from the bridge.
Unregister
Removes the bridge from Nexia. All remote
control features will be disabled.
Factory Reset
Resets all Z-Wave information and removes all
devices from the bridge.
Association Group Information Table
Group Prole
Command Class and
Command List
Group
Name
Max Number
of Devices
Trigger
1
General:
Lifeline
Device Reset Locally
Notication
Lifeline 5
Factory
Reset
Terminology - The following terms may be used
interchangeably by other devices, manufacturers, and Nexia.
ADD Add, include, inclusion, enroll, connect
REMOVE Remove, exclude, exclusion
COPY Copy, learn, replicate, replication
• Basic Command Class: this device ignores
Basic Set/Get commands.