Information Manual 87
FastPak™ “Settings Group” Menu Record
Refrigerant Monitor Settings Group:
Menu item Choices Design/Actual
1 Alarm Level 1
2 Alarm Level 2
3 Alarm Level 3
4 Refrigerant Audible Alarm Disable, Alarm 1, Alarm 2
Alarm 3
5 Trouble Audible Alarm Disable, Enable
6 Alarm 1 Latching Status Latching, Non-Latching
7 Alarm 2 Latching Status Latching, Non-Latching
8 Alarm 3 Latching Status Latching, Non-Latching
9 Channel Scanner (Displayed only when
refrigerant monitor mode is in “Warm-up”.)
Installed, Not Installed
10 Scanner Channel 1 Active, Inactive
11 Scanner Channel 2 Active, Inactive
12 Scanner Channel 3 Active, Inactive
13 Scanner Channel 4 Active, Inactive
14 Scanner Dwell Threshold 30 to 70
15 Auxiliary Input Installed, Not Installed
16 Auxiliary Input Alarm Disable, Enable
17 Auxiliary Input Alarm Level 4.0 to 20.0
18 Auxiliary Input Alarm Direction Above, Below
19 Auxiliary Input Audible Alarm Off, On
20 Analog Output Range 0 to 100, 0 to 1000