Mechanical
Specifications
CAB-PRC001-EN 51
Disconnect Switch
A unit mounted disconnect switch is
available as a standard option on all units.
Colors
Six decorator colors are available in a
baked powder finish. For a color chart,
contact your local Trane office for a copy
of UNT-S-10.
Extended End Pockets
On vertical or horizontal cabinet units, an
8” (20 cm) extended end pocket is
available on the piping end.
Tamperproof Locks
Key-operated locking access doors and/or
panels will help prevent nuisance
tampering with unit and/or controls.
Tamperproof locks are available on
vertical cabinet, horizontal cabinet,
vertical wall-hung cabinet, vertical
recessed, and vertical slope-top units.
Leveling Feet
Refrigerator type screw-in bolts to level
the unit are available on vertical units.
Quad Grille Outlet
Quad grilles are square multi-directional
grilles that allow four different discharge
directions by rotating the grilles 90°. The
quad grille is constructed of a black plastic
material (NORYL-SE 1-731) with a 15°
angle on the discharge louvers. Quad
grilles are available on all cabinet style
units.
Bar Grille Inlet/Outlet
Bar grilles are formed steel grille options
available on the discharge of all units and
the return of vertical cabinet and vertical
slope tops. The grilles have a black paint
finish with 18-gage steel construction.
The louvers are formed at a 15° angle.
The bar grilles are fixed in one discharge
direction.
Sub-bases
Sub-bases elevate vertical cabinet or
slope top cabinet units to a specified
height; for example, to reach the bottom
of a window sill. The sub-base also
provides a cavity through which to run
piping underneath the unit. Sub-bases
are 16-gage steel construction and have
the same black paint finish as the unit’s
base. The sub-base is available in heights
between 2 - 7” (5 -18 cm) in
1
/
2
” (1 cm)
increments. The sub-base depth and
width is identical to the unit’s dimensions.
Quad Grille Outlet
Bar Grille Inlet and Outlet
Sub-base (shown turned on its side)
To Next Page
Loading...
