Trane Force-Flo - Page 54

Mechanical
Specifications
CAB-PRC001-EN54
Control Valve
Material
body — forged brass
drive shaft stem — chrome-plated brass (modulating) brass (2-position)
seat — stainless steel (modulating)
ball plug — Buna N rubber (2-postion)
plug — high temperature thermoplastic (modulating)
o-ring seals —EPDM rubber (2-position)
actuator — stainless steel base plate, aluminum cover
Temperature
200°F max (93°C)
Working Pressure
300 psi (2,069 kPa)
Pressure Drop (close-off
∆∆
∆∆
∆P)*
2-way, two-position, N.O. = 30 psig (207 kPa) & 50 psig (345 kPa)
2-way, two-position, N.C. = 30 psig (207kPa) & 50 psig (345 kPa)
3-way, two-position, N.O. = 28 psig (193kPa)
3-way, two-position, N.C. = 20 psig (138 kPa)
2-way modulating = 50 psig (345 kPa)
3-way modulating = 50 psig (345 kPa)
Balance Fitting
Material
packing washer — 11 ga. brass
o-ring — EPDM rubber
stem — rod brass
gland screw — hex brass
valve body — cast brass
Union
Material
nut — forged brass
body — copper
tail — copper
Strainer
Material
body — cast bronze (85-5-5-5)
cover — cast bronze (85-5-5-5)
screen — stainless steel (20 mesh)
gasket — Teflon
Pressure and Temperature
400 psi (2,758 kPa) at 150°F (66°C)
Control Valve
Balance Fitting
Strainer