Selection
Procedure
CAB-PRC001-EN6
Note: Some options may not be available with all cabinet styles. Contact your local Trane
representative for more information.
model number
description
F = 3-way, 2-position, NO (28 psig)
G = 2-way, 2-position, NC (60 psig)
H = 3-way, 2-position, NC (28 psig)
J = 2-way, modulating, 0.7 Cv (60 psig)
K = 3-way, modulating, 0.7 Cv (60 psig)
L = 2-way, modulating, 1.5 Cv (60 psig)
M = 3-way, modulating, 1.5 Cv (60 psig)
N = 2-way, modulating, 2.5 Cv (60 psig)
P = 3-way, modulating, 2.5 Cv (60 psig)
Q = 2-way, modulating, 4.0 Cv (60 psig)
R = 3-way, modulating, 4.0 Cv (60 psig)
X = field-supplied, NO
Y = field-supplied, NC
Z = field-supplied 3-wire modulating
Digit 28 — Not used
0 = none
Digit 29 — Piping packages
0 = none
A = basic ball valve supply and return
B = basic ball valve supply/manual
circuit setter
C = basic ball valve supply and return
with auto circuit setter
D = deluxe ball valve supply and return
E = deluxe ball valve supply/manual
circuit setter
F = deluxe ball valve supply and return
with auto circuit setter
Digit 30 — Control type
A = fan speed switch
E = Tracer ZN010
F = Tracer ZN510
G = Tracer ZN520
Digit 31 — Control option
D = unit mounted fan speed switch
K = wall mounted fan speed switch
V = unit mounted fan speed switch w/
setpoint dial
W = wall mounted fan speed switch w/
setpoint dial
X = unit mounted fan speed switch w/
wall mounted setpoint dial
Y = unit mounted fan speed switch & wall
mounted setpoint dial w/ comm.
Z = unit mounted fan speed switch, on/
cancel, setpoint dial w/ comm.
1 = wall mounted on/cancel w/comm.
2 = wall mounted fan speed switch,
setpoint dial, on/cancel w/comm.
Digit 32 — Not used
0 = none
Digits 33, 34 —Future control functions
0 = none
Digit 35 — Control function #3
0 = none
Digit 36 — Control function #4
0 = none
Digit 37 — Control function #5
0 = none
2 = fan status sensor
Digit 38 — Control function #6
0 = none
2 = filter status sensor
Digit 39 — Projection panels and
falsebacks
0 = none
A =
5
/
8
”standard recessed panel
(vertical recessed units only)
B = 2” projection panel
C = 2.5” projection panel
D = 3” projection panel
E = 3.5” projection panel
F = 4” projection panel
G = 4.5” projection panel
H = 5” projection panel
J = 5.5” projection panel
L = 2” falseback
K = 6” projection panel
M = 3” falseback
N = 4” falseback
P = 5” falseback
Q = 6” falseback
R = 7” falseback
T = 8” falseback
Digit 40 — Main autoflow gpm
A = 0.5 E = 2.0 J = 4.0 N = 7.0
B = 0.75 F = 2.5 K = 4.5 P = 8.0
C = 1.0 G = 3.0 L = 5.0
D = 1.5 H = 3.5 M = 6.0
Digit 41 — Not used
Digit 42 — Subbases
0 = none
A = 2” subbase D = 5” subbase
B = 3” subbase E = 6” subbase
C = 4” subbase F = 7” subbase
Digit 43 — Recessed flange
0 = none
A = recessed flange
Digit 44 — Wall boxes
0 = none
A = anodized wall box
To Next Page
Loading...
