RT-SVX069D-EN
31
no greater than 600 psi. To minimize the risk of coil
damage, approach the cleaning of the coil with the
pressure washer aimed perpendicular to the face of the coil
during cleaning. Optimum clearance between the sprayer
nozzle and the microchannel coil is 1”–3”.
Final Process
For future reference, record the unit data below in the
blanks provided.
Table 13. Unit data log
Complete Unit Model Number
Unit Serial Number
Wiring Diagram Numbers (from
unit control panel)
-schematic(s)
-connections
Network ID
Maintenance
To Next Page
Loading...
