D-Log Files Management
The controller records on a non-volatile memory, approximately the last 4 days of work.
You can download these log files directly to a USB stick, or on your PC by connecting properly to the
controller.
To download these files on a USB stick, plug into the USB port and navigate through the menu func-
tions until you see .
In this menu select “files log management”, and inside select “Send all logs to a USB” and press
enter.
Finished sending, inside the key will create a folder “ipro” with inside three files of alarms:
“alarm_a” that records all water side alarms and errors probes
“alarm_b” that records all circuit alarms such as high and low pressure
“alarm_c” that records all serious alarms such as overload compressors alarms.
file “Unit” where the last 4 days of operation with status and main variables are recorded.
All of these files are in “.txt” format and inside the recording date is in the format
YY/MM/DD/hh/mm/ss.
This operation is to be performed on both cards.
N.B.: Before you do this, make sure that there is no folder already named "ipro." on the USB stick.
To Next Page
Loading...
