To Next PageTo Next Page
Need help?Do you have a question about the Trane TR200 Series and is the answer not in the manual?
General| Input Voltage | 24 VAC |
|---|---|
| Frequency Range | 50/60 Hz |
| Communication Protocols | BACnet MS/TP, Modbus RTU |
| Controller Type | Programmable |
| Power Range | 20 VA |
| Control Method | PID Control |
| Enclosure Rating | IP20 |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity Range | 5% to 95% non-condensing |
| Memory | Non-volatile |
Alerts about dangerous voltage levels and risks of injury or equipment damage from incorrect installation.
Details critical steps to take before starting any repair work on the frequency converter.
Discusses special applications and their impact on electrical ratings and installation requirements.
Provides warnings and guidelines for connecting frequency converters to IT mains supplies.
Outlines proprietary information, user agreement, warranty, and revision rights for the publication.
Provides a glossary of abbreviations used throughout the manual.
Defines key terms and concepts related to frequency converters, inputs, and motors.
Describes the keypad layout, display lines, and functional groups for operation and programming.
Explains quick parameter setup, data transfer between keypads, and accessing parameters.
Details how to access and configure function setups for various TR200 applications.
Guides on navigating the Main Menu mode for parameter selection and changing data.
Provides step-by-step instructions for changing text and numeric data values.
Outlines the parameter grouping system for easy selection within the frequency converter.
Parameters related to fundamental functions, keypad buttons, and display configuration.
Contains parameters for defining motor data and torque characteristics.
Details parameters for configuring DC brake and DC hold functions.
Covers parameters for setting reference units, limits, and ramp configurations.
Parameters for configuring limits and warnings for current, speed, reference, and feedback.
Parameters for configuring digital input and output functions.
Parameter group for configuration of analog input and output.
General settings for communications and options, including FC Port and bus settings.
Parameters specific to LonWorks communication and ID configuration.
Parameters for programming Smart Logic Control (SLC) features, including events and actions.
Parameters for configuring special frequency converter functions like switching patterns and mains monitoring.
Configuration for Extended Closed Loop PID controllers for advanced control applications.
Parameters for monitoring TR200 applications like No-Flow and Sleep Mode.
Parameters for programming timed actions, maintenance schedules, and energy logging.
Parameters related to Fire Mode and Drive Bypass functions for critical applications.
Explains how alarms and warnings are signaled and how to reset them.
Lists alarm codes and their corresponding descriptions in hexadecimal format.
Lists warning codes and their corresponding descriptions in hexadecimal format.
Details extended status word codes and their meanings for system monitoring.
Provides detailed explanations and troubleshooting steps for specific fault codes.
