Trane TR200 Series - Main Menu - Digital In;Out - Group 5

Main Menu - Digital In/Out - Group 5
5-** Digital In/Out
Parameter group for configuring the digital input and output.
5-0* Digital I/O Mode
Parameters for configuring the input and output using NPN and PNP.
5-01 Terminal 27 Mode
Option: Function:
[0] * Input Defines terminal 27 as a digital input.
[1] Output Defines terminal 27 as a digital output.
Please note that this parameter cannot be adjusted while the motor is running.
5-02 Terminal 29 Mode
Option: Function:
[0] * Input Defines terminal 29 as a digital input.
[1] Output Defines terminal 29 as a digital output.
This parameter cannot be adjusted while the motor is running.
Parameter Description
88 TR200 Programming Guide