Need help?Do you have a question about the Trane TRACER CH532 and is the answer not in the manual?
General| Model | TRACER CH532 |
|---|---|
| Dimensions | Varies depending on enclosure type. Typically around 6" x 4" x 2" |
| Weight | Approximately 1 lb |
| Communication Protocols | BACnet MS/TP |
| Communication Protocol | BACnet MS/TP |
| Input Voltage | 24 VAC |
| Display | LCD |
| Memory | Non-volatile memory |
Step-by-step guide on how to start the TRACER CH532 unit.
Step-by-step guide on how to safely stop the TRACER CH532 unit.
Configuring unit type, refrigerant, number of fans, and water pump type.
Setting compressor timers and high-pressure control parameters.
Selecting sensor types and configuring pressure transducer settings.
Configuring cooling limits, defrost setpoints, and cycle termination parameters.
Configuring control dead bands and winter freeze protection settings.
Setting operation limits and configuring analog output for speed inverters.
Setting compressor alarm thresholds and resetting default parameters.
Procedures for viewing alarms on the user interface and performing manual resets.
Instructions on how to access and navigate through the recorded alarm history.
To Next Page