Trane Tracer UC600 User Manual

BAS-SVX45F-GB
Installation, Operation, and
Maintenance
Tracer
®
UC600 Programmable Controller
Ordering Number: BMUC600AAA0100011
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing
of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and
training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags,
stickers, and labels that are attached to the equipment.

Trane Tracer UC600 Specifications

General

Type	Building Automation Controller
Communication Protocol	BACnet MS/TP
Protocols Supported	BACnet MS/TP
Input/Output Points	Configurable
Inputs/Outputs	Configurable
Display	LCD
Power Supply	24 VAC
Input Voltage	24 VAC/VDC
Communication Protocols	BACnet MS/TP
Storage Temperature	-40° to 185°F (-40° to 85°C)

Summary

Introduction

Warnings, Cautions, and Notices

Defines advisory types for safety and operations.

Field Wiring and Grounding Safety

Stresses qualified personnel for safe wiring and grounding.

Personal Protective Equipment (PPE)

Details mandatory PPE for installation and servicing due to hazards.

Overview

Specifications

Lists operational and storage specifications for the UC600 controller.

Hardware Terminations

Details the types of inputs and outputs supported by the UC600 controller.

Agency Listings and Compliance

Lists UL and CE standards the UC600 controller complies with.

Installation

Mounting and Removing the UC600 Controller

Guides on mounting and dismounting the UC600 controller on a DIN rail.

Setting Addresses using Rotary Switches

Explains setting device addresses for networks using rotary switches.

Setting the BACnet Device ID

Details how BACnet device IDs are assigned, including default and soft-set methods.

Tracer UC600 Pre-power Checks

Resistive Inputs

Outlines pre-power checks for resistive inputs, including measurement procedures.

Voltage and Current Inputs

Details pre-power checks for voltage and current inputs, including measurements.

Binary Inputs

Describes pre-power checks for binary inputs, including resistance measurements.

Wiring and Powering the Tracer UC600

AC Power Warnings and Requirements

Highlights hazardous voltage warnings and requirements for AC power circuits.

Wiring AC Power to the UC600

Provides step-by-step instructions for wiring AC power to the UC600.

Controller Startup and Power Check

Guides on verifying wiring, checking power, and interpreting LED indicators.

Wiring Inputs and Outputs

Input/Output Wiring Requirements

Lists general requirements for input/output wiring, including wire types and routing.

Wiring Analog Signals

Details wiring for analog inputs (0-10VDC, 0-20mA) and outputs.

Wiring Binary Signals

Explains how to wire binary inputs and outputs for the UC600.

Connecting Pressure Transducer Inputs

Guides on connecting pressure transducer inputs to the UC600.

Tracer UC600 Operation

LED Descriptions and Activities

Explains LED meanings and provides troubleshooting tips for indicators.

Troubleshooting Communication Problems

Provides solutions for communication issues between UC600, SC, and TU.

Configuring Tracer UC600 with Tracer TU

Establishing Tracer TU Connection

Guides on starting Tracer TU sessions and establishing connections via USB or network.

Configuring UC600 Settings

Details configuring date, time, units, protocol, and points using Tracer TU.

Using Pre-packaged Solutions (PPS)

Explains how to add pre-configured control applications using PPS files.

Setting Up and Maintaining Schedules

Guides on creating and managing schedules, including events and exceptions.

Commissioning/Troubleshooting in a Powered State

Testing Input and Output Points

Details procedures for testing input types (resistive, voltage, current) in a powered state.

Ground Measurements

Details methods for performing ground measurements for system integrity.

Appendix A: Configuring Tracer UC600 for BACnet/IP

Device ID Assignment for BACnet/IP Devices

Explains how device IDs are assigned for BACnet/IP devices.

Configuring IP and BACnet Information

Guides on configuring IP network settings and BACnet protocol parameters.

Setting Up a BDT

Guides on setting up a Broadcast Distribution Table for BBMD functionality.

Declaration of CE Conformity