Trane Tracer UC600 Installation Guide

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
November 2019
BBAASS--SSVVPP004422AA--EENN
Tracer®® UC600 Programmable Controller
for Modular Self Contained
Installation Guide

Trane Tracer UC600 Specifications

General

Type	Building Automation Controller
Communication Protocol	BACnet MS/TP
Protocols Supported	BACnet MS/TP
Input/Output Points	Configurable
Inputs/Outputs	Configurable
Display	LCD
Power Supply	24 VAC
Input Voltage	24 VAC/VDC
Communication Protocols	BACnet MS/TP
Storage Temperature	-40° to 185°F (-40° to 85°C)