BAS-SVX45F-GB 53
Configuring Tracer UC600 with Tracer TU
Monitoring and Viewing the Status of the Tracer UC600
Use the Status Utility tab to monitor and view the details of Tracer UC600 points list, alarms, and
controller status.
To monitor and view details:
1. Select the Status Utility tab from the vertical tab set located on the right side of the Tracer TU
window.
2. Choose and select a member tab to view its list of information such as data type, value, unit,
state, control, and details.
Note: If viewing alarm status, this tab screen displays up to 100 active alarms. Alarms
automatically reset when their condition returns to normal.
Figure 29. Viewing Tracer TU Status
To Next Page
Loading...
