BAS-SVX45F-GB 7
Overview
The Tracer
®
UC600 controller, (PN# BMUC600AAA0100011), is a multi-purpose, programmable,
wireless-compatible device. It is designed to control the following types of equipment:
• Air-handling units (AHUs)
• Rooftop units
• Chillers
• Central heating and cooling plants
• Cooling towers
• Generic input/output (I/O) control
Smoke Control Support (UUKL)
The Tracer UC600 programmable controller is now UL864 certified, making it fully capable of
serving as a component of a UUKL smoke control system along with the Tracer SC system
controller. For more information, see the “Engineered Smoke Control System Applications Guide”,
(BAS-APG019).
Air-Fi™ Wireless Communications Interface (WCI) Support
The Air-Fi™ Wireless Communications Interface (WCI) is an alternative to BACnet® wired
communication links. The WCI is a wireless communications component (option) added to Tracer
controllers and is compatible with Tracer UC600. Tracer UC600 firmware must be at V4.00.027 or
higher for compatibility with WCI.
Refer to the following documentation for more information:
• Air-Fi™ Wireless Communications Interface Installation Instructions (X39641264001)
• Air-Fi™ Wireless Installation, Operation, and Maintenance (BAS-SVX40)
• Air-Fi™ Wireless Network Design Best Practices Guide (BAS-SVX55)
Expansion Module Requirements
If additional input or output points are needed, the XM30, XM32, and XM70 expansion modules
can be used. The UC600 controller will support up to 120 combined I/O terminations. See the
“Tracer Expansion Module IOM,” (BAS-SVX46), for application and installation information.
To Next Page
Loading...
Need help?
General
