Trane TR200 Series - Brakes

Par. No.
#
Parameter description Default value 4-set-up Change
during
operation
Conver-
sion in-
dex
Type
1-7* Start Adjustments
1-71 Start Delay 0.0 s All set-ups TRUE -1
Uint1
6
1-73 Flying Start [0] Disabled All set-ups FALSE - Uint8
1-8* Stop Adjustments
1-80 Function at Stop [0] Coast All set-ups TRUE - Uint8
1-81
Min Speed for Function at Stop
[RPM] ExpressionLimit All set-ups TRUE 67
Uint1
6
1-82 Min Speed for Function at Stop [Hz] ExpressionLimit All set-ups TRUE -1
Uint1
6
1-86 Trip Speed Low [RPM] 0 RPM All set-ups TRUE 67
Uint1
6
1-87 Trip Speed Low [Hz] 0.0 Hz All set-ups TRUE -1
Uint1
6
1-9* Motor Temperature
1-90 Motor Thermal Protection [4] ETR trip 1 All set-ups TRUE - Uint8
1-91 Motor External Fan [0] No All set-ups TRUE -
Uint1
6
1-93 Thermistor Source [0] None All set-ups TRUE - Uint8
2-** Brakes
Par. No.
#
Parameter description Default value 4-set-up Change
during
operation
Conver-
sion in-
dex
Type
2-0* DC-Brake
2-00 DC Hold/Preheat Current 50 % All set-ups TRUE 0 Uint8
2-01 DC Brake Current 50 % All set-ups TRUE 0
Uint1
6
2-02 DC Braking Time 10.0 s All set-ups TRUE -1
Uint1
6
2-03 DC Brake Cut In Speed [RPM] ExpressionLimit All set-ups TRUE 67
Uint1
6
2-04
DC Brake Cut In Speed [Hz] ExpressionLimit All set-ups TRUE -1
Uint1
6
2-1* Brake Energy Funct.
2-10 Brake Function [0] Off All set-ups TRUE - Uint8
2-11 Brake Resistor (ohm) ExpressionLimit All set-ups TRUE 0
Uint1
6
2-12 Brake Power Limit (kW) ExpressionLimit All set-ups TRUE 0
Uint3
2
2-13 Brake Power Monitoring [0] Off All set-ups TRUE - Uint8
2-15 Brake Check [0] Off All set-ups TRUE - Uint8
2-16 AC brake Max. Current 100.0 % All set-ups TRUE -1
Uint3
2
2-17 Over-voltage Control [2] Enabled All set-ups TRUE - Uint8
Parameter Lists
260 TR200 Programming Guide