Definitions
Frequency converter:
D-TYPE
Size and type of the connected frequency converter (dependencies).
I
DRIVE,MAX
The maximum output current.
I
DRIVE,N
The rated output current supplied by the frequency converter.
U
DRIVE, MAX
The maximum output voltage.
Input:
Control command
You can start and stop the connected motor by means
of keypad and the digital inputs.
Functions are divided into two groups.
Functions in group 1 have higher priority than func-
tions in group 2.
Group 1 Reset, Coasting stop, Reset and Coasting
stop, Quick-stop, DC braking, Stop and
the "Off" key.
Group 2 Start, Pulse start, Reversing, Start revers-
ing, Jog and Freeze output
Motor:
f
JOG
The motor frequency when the jog function is activated (via digital terminals).
f
M
The motor frequency.
f
MAX
The maximum motor frequency.
f
MIN
The minimum motor frequency.
f
M,N
The rated motor frequency (nameplate data).
I
M
The motor current.
I
M,N
The rated motor current (nameplate data).
M-TYPE
Size and type of the connected motor (dependencies).
n
M,N
The rated motor speed (nameplate data).
n
s
Synchronous motor speed
n
s
=
2×
par
. 1 − 23 × 60
s
par
. 1 − 39
P
M,N
The rated motor power (nameplate data).
T
M,N
The rated torque (motor).
Introduction
12 TR200 Programming Guide
To Next Page
Loading...
