Trane TR200 Series - Main Menu - Data Readouts - Group 16

Main Menu - Data Readouts - Group 16
16-** Data Readouts
Parameter group for data read-outs, e.g. actual references, voltages, control, alarm, warning and status words.
16-0* General Status
Parameters for reading the general status, e.g. the calculated reference, the active control word, status.
16-00 Control Word
Range: Function:
0 N/A* [0 - 65535 N/A] View the Control word sent from the frequency converter via the serial
communication port in hex code.
16-01 Reference [Unit]
Range: Function:
0.000
Referen-
ceFeed-
backU-
nit*
[-999999.000 - 999999.000
ReferenceFeedbackUnit]
View the present reference value applied on impulse or analog basis in
the unit resulting from the configuration selected in par.1-00
Configura-
tion Mode (Hz, Nm or RPM).
16-02 Reference [%]
Range: Function:
0.0 %* [-200.0 - 200.0 %] View the total reference. The total reference is the sum of digital, analog,
preset, bus, and freeze references, plus catch-up and slow-down.
16-03 Status Word
Range: Function:
0 N/A* [0 - 65535 N/A] View the Status word sent from the frequency converter via the serial
communication port in hex code.
16-05 Main Actual Value [%]
Range: Function:
0.00 %* [-100.00 - 100.00 %] View the two-byte word sent with the Status word to the bus Master
reporting the Main Actual Value.
16-09 Custom Readout
Range: Function:
0.00
Custom-
Readou-
tUnit*
[-999999.99 - 999999.99
CustomReadoutUnit]
View the user-defined readouts as defined in par.0-30
Custom Readout
Unit, par.0-31 Custom Readout Min Value and par.0-32 Custom Readout
Max Value.
Parameter Description
170 TR200 Programming Guide