1-93 Thermistor Source
Option: Function:
Select the input to which the thermistor (PTC sensor) should be connec-
ted. An analog input option [1] or [2] cannot be selected if the analog
input is already in use as a reference source (selected in par.3-15
Refer-
ence 1 Source, par.3-16 Reference 2 Source or par.3-17 Reference 3
Source).
When using MCB112, choice [0]
None
must always be selected.
[0] * None
[1] Analog input 53
[2] Analog input 54
[3] Digital input 18
[4] Digital input 19
[5] Digital input 32
[6] Digital input 33
NOTE: This parameter cannot be adjusted while the motor is running.
Parameter Description
68 TR200 Programming Guide
To Next Page
Loading...
