12
Mini / Multi-Split Programmable Controller
3.8.1 Fresh Air
3.8.2 Sleep
After entering the user function screen, press the “▲” or “▼ ” button to select the
SLEEP function and press the “◀” or “▶” button to turn on or turn off the SLEEP func-
tion. The selected setting will save automatically.
If this function is turned on, the unit will operate according to the preset sleep
curve to provide a comfortable sleep environment.
Note:
• In FAN or AUTO mode, the SLEEP function is not available.
• The sleep function will be canceled when the unit is turned off or when the modes
are changed.
3.8.3 Health
3.8.4 I-Demand
After entering the user function screen, press the “▲” or “▼ ” button to select
the I-DEMAND function and press the “◀” or “▶” button to turn on or turn off this func-
tion. The selected setting will save automatically.
Note:
• This function is only available in COOLING mode.
• When this function has been set, the set temperature is displayed as 27°C(81°F).
• The temperature and fan speed settings are not selectable when the I-DEMAND
function is activated.
• The I-DEMAND function will be canceled when the unit is turned off or when the
• modes are changed
• The I-DEMAND function and SLEEP function cannot be selected simultaneously.
3.8.5 Holiday (Vacation)
After entering the user function screen, press the “▲” or “▼ ” button to select
the Holiday (vacation) function and press the “◀” or “▶” button to turn on or turn off this
function. The selected setting will save automatically.
Note:
• This function is only available in HEATING mode.
• When this function has been set, set temperature is displayed as 8°C( 46°F) . The
• temperature and fan speed settings are unavailable when the HOLIDAY (vacation)
• function is activated.
• This function will be canceled when switching modes.
• The HOLIDAY (vacation) function and SLEEP function cannot be used simultane-
ously.
This function is currently unavailable.
This function is currently unavailable.
To Next Page
Loading...
Need help?
General
