To Next Page

To Previous Page

Mini / Multi-Split Programmable Controller

3.8.6 Memory

After entering the user function menu, press the “▲” or “▼ ” button to select the

MEMORY function and press the “◀” or “▶” button to turn on or turn off the MEMORY

function. The selected setting will save automatically. When the MEMORY function is

activated, the unit will retain its previous settings after a power failure. It is recom-

mended to keep the MEMORY function on.

3.8.7 Fixed Angle Louver (Swing Angle)

This function is currently unavailable and will be canceled automatically after setting.

3.8.8 Energy Save

This function is currently unavailable and will be canceled automatically after setting.

3.8.9 Auxiliary Heat

This function is currently unavailable

3.8.10 Dry (X-Fan) Function

After entering the Function menu press the “▲” or “▼ ” button to select the

DRY function option and press the “◀” or “▶” button to turn on or turn off this function.

The selected setting will save automatically.

Note:

• This function is only available in COOLING mode and DRY mode.

• When this function is on, and the air conditioner is turned off, the indoor fan will

continue to operate at low speed for a set time to dry any condensation from the

indoor unit.

3.8.11 Quiet

This function is currently unavailable.

3.8.12 Fahrenheit Mode

After entering the Function menu, press the “▲” or “▼ ” button to select the

FAHRENHEIT mode setting. Press the “◀” or “▶” button to turn on or turn off this func-

tion. The selected setting will save automatically. After closing this function, the correct

temperature will be displayed. When FAHRENHEIT mode is turned off, the temperature

will be displayed in Celsius.

Trane Mini User Manual

Questions and Answers: