3” (76.2)
48 1/16”
(1220.8)
10 7/16”
(265.1)
34 9/16”
(877.9)
35 5/8”
(904.9)
1 1/8”
(28.6)
12”
(304.8)
13 9/16”
(344.5)
20 1/16”
(509.6)
1 11/16”
(42.9)
10 1/8”
(265.5)
16 7/16” (417.8)
12”
(304.8)
13 9/16”
(344.5)
1 3/4”
(44.45)
2 3/4”
(69.9)
DRAIN CONNECTION
FOR HORIZONTAL
(SEE NOTE 2,3,5)
32 1/2”
(825.5)
12 7/16”
(315.9)
1 3/8”
(34.9)
0.99”
(25.15)
0.99” (25.15)
1 3/8” (34.9)
3 3/16” (81)
3 7/16” (87.3)
22 5/8”
(574.7)
22 5/8”
(574.7)
16 1/4”
(412.8)
0.77”
(19.6)
0.50” (12.7)
3 9/16”
(90.5)
7 9/16”
(192.1)
37 15/16”
(963.6)
24 1/16”
(611.2)
2 5/16”
(58.7)
6 7/8”
(174.6)
6 15/16”
(176.2)
BOTTOM RETURN
SIDE RETURN
CONTROL BOX
ACCESS PANEL
NOTES:
1. PANEL DEPTH 1/2” (12.7) (TYP. ALL PANELS).
2. REMOVABLE DRAIN PAN AND ATTACHED DRAIN CONNECTION MAY BE INSTALLED ON END
OF UNIT IN EITHER THE VERTICAL OR HORIZONTAL CONFIGURATION, PLASTIC DRAIN PAN
ACCESS PLATE ON THE END OF UNIT OPPOSITE DRAIN CONNECTION MUST BE REMOVED TO
SLIDE DRAIN PAN OUT OF UNIT FOR CLEANING. ACCESS PLATE MUST BE RE-INSTALLED AFTER
SLIDING DRAIN PAN BACK INTO UNIT.
3. IF PERIODIC DRAIN PAN CLEANING IS REQUIRED, ALLOW ROOM FOR PARTIAL REMOVAL OF
DRAIN PAN CONNECTION AT END OF UNIT.
4. 1” (25.4) FEMALE SCHED. 40 (10.2) PVC PIPE DRAIN CONNECTION VERTICAL CONFIGURATION.
5. 1” (25
.4) FEMAL
E SCHED. 40 (10.2)
PVC PIPE
DRAIN CONNECTION HORIZONTAL CONFIGURATION.
SEE NOTES 2,3,4
SEE NOTES 2,3,4
(4) - HOLE FOR HORIZONTAL
SUSPENSION
COPPER LIQUID LINE
FIELD CONNECTION
COPPER SUCTION LINE
FIELD CONNECTION
1 3/8” (34.9) O.D. SUCTION LINE
REMOTE BULB TXV
FILTER ACCESS PANEL
32” (813) MIN. DISTANCE
BOTH SIDE
FILTER
SUPPLY OPENING
BOTTOM RETURN
SIDE RETURN
BOTTOM RETURN
SUPPLY VERTICAL -
RETURN HORIZONTAL /
RETURN VERTICAL
SUPPLY HORIZONTAL -
RETURN VERTICAL /
RETURN HORIZONTAL
(4) - HOLE FOR HORIZONTAL
SUSPENSION
SIDE RETURN
CONTROL WIRING
LINE VOLTAGE
LIQUID LINES
DUCT FLANGE
1” (25.4)
HEIGHT
SUPPLY
OPEN
HEATER
VENTILATION
HEATER CONTROL
AND SINGLE POWER
ENTRY WIRES
32 1/2”
(825.5)
2 3/4”
(69.9)
13 5/16”
(338.14)
To Next Page
Loading...