40
SSA-SVX06H-EN
Field Installed Electric Heat Kits
When Electric Heat Kits are installed into an Odyssey
Air Handler paired with a Symbio 700 controlled
condenser, configure the Symbio 700 controller so that
the electric heat control sequences and output signals
will be generated. Use the following steps and refer to
through .
1. In the Mobile Service and Installation app, tap
SSeettttiinnggss.
2. Tap EEddiitt.
3. Tap PPrriimmaarryy HHeeaattiinngg SSoouurrccee.
4. Tap EElleeccttrriicc.
5. Tap PPrriimmaarryy HHeeaattiinngg SSoouurrccee.
6. Select 11 oorr 22.
7. Tap AAppppllyy.
8. Verify that all settings are correct.
Figure 36. Edit configuration
SSttaarrttuupp
To Next Page
Loading...