42
SSA-SVX06H-EN
Electric Heat as Secondary Heat (Heat
Pump Systems)
To configure Electric Heat as Secondary Heat (Heat
Pump Systems) use the following steps and refer to
Figure 40, p. 42 through Figure 43, p. 43:
1. In the Mobile Service and Installation app, tap
SSeettttiinnggss.
2. Tap EEddiitt.
3. Tap SSeeccoonnddaarryy HHeeaattiinngg SSoouurrccee.
4. Tap EElleeccttrriicc.
5. Tap SSeeccoonnddaarryy HHeeaattiinngg SSoouurrccee.
6. Select 11 oorr 22.
7. Tap AAppppllyy.
8. Verify that all settings are correct.
Figure 40. Edit configuration
SSttaarrttuupp
To Next Page
Loading...