28
PTAC-SVX002A-EN
Use the following checklist to ensure proper care of the ProSpace unit. Equipment operation
should be checked and verified several times during each year.
Clean both sides of outdoor coil. (Never use high pressure spray on coils.)
Clean base pan and outdoor vent filter.
Clean outdoor orifice and fan.
Clean indoor coil. (Never use high pressure spray on coils.)
Clean indoor fan, wire screen and front panel.
Clean or install new indoor - air inlet filter(s).
Clean wall sleeve and outdoor grille.
Inspect cord and receptacle.
Secure electrical connections.
Ensure front panel is properly mounted and not damaged.
Ensure wall sleeve is installed properly.
Ensure heat and cool cycles operate properly.
CCaarree aanndd CClleeaanniinngg
To Next Page
Loading...
