Trane ProSpace PTHF User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
November 2015
PTAC-SVX002A-EN
ProSpace
™™
Packaged Terminal Air Conditioner (PTAC)
Models PTEF and PTHF
Installation, Operation,
and Maintenance

Trane ProSpace PTHF Specifications

General

Brand	Trane
Model	ProSpace PTHF
Category	Air Conditioner
Language	English

Summary

Safety and Warning Guidelines

Electrical Safety and Grounding

Critical warnings about field wiring, grounding hazards, and compliance.

Personal Protective Equipment (PPE)

PPE Requirements for Technicians

Specifies necessary PPE for safe installation and servicing of the unit.

General Safety Precautions

Operational Safety Instructions

Key safety advice to prevent injury, death, or property damage during operation.

Model Number Identification

ProSpace Model Number Breakdown

Unit Features and Capabilities

Electrical Specifications

Power Connection and Outlet Requirements

Guidelines for selecting the correct power cord and outlet.

Electrical Grounding and Wiring Standards

Requirements for safe unit grounding and branch circuit wiring.

Voltage Supply and Cord Selection

Power Cord Protection and Safety

Installation Guide

Wall Sleeve and Grille Installation

Instructions for installing the Trane wall sleeve and front grille.

Installing the Unit Chassis

Securing the Chassis in the Sleeve

Steps for safely inserting and securing the unit chassis into the wall sleeve.

System Configuration Options

Dip Switch Functionality

Configuring Unit Settings with Dip Switches

Unit Operation Guide

Front Panel Control Operations

Remote Control Usage

Operating the ProSpace Remote Control

Troubleshooting Common Issues

Unit Start-up and Operational Problems

Solutions for issues like unit not starting, poor cooling/heating, or display errors.

Advanced Troubleshooting Scenarios

Resolving Ice Formation and Compressor Issues

Guidance on troubleshooting ice on coils and compressor protection modes.