Need help?Do you have a question about the Trane RTAD 125 HE and is the answer not in the manual?
Explanation of hazard symbols and their implications for safety.
Sizing and selection of power supply wiring according to EN 60204.
A checklist of procedures to verify before starting the unit installation.
Safety precautions and steps for connecting unit power supply and auxiliary circuits.
Importance of correct phase sequence (A-B-C) to prevent equipment damage.
Sequence of operations during a typical chiller startup, including delays and responses.
Steps for preparing the unit for seasonal operation after a shutdown period.
Procedures for restarting the unit after it has been out of service for an extended time.
Procedure for shutting down the unit for a short time and restarting it.
Steps for taking the unit out of service for an extended period, like seasonal shutdown.
Importance of proper refrigerant and oil charge for unit operation and performance.
Procedure for charging R134a refrigerant into the unit, with safety warnings.
Recommendations for safety during maintenance and service visits.
To Next Page
General
