50 RT-SVP07B-EN
STATUS Menu
VCM Outside Air Flow Input 350.0 CCFM
Used With: Units w/Fresh Air
Measurement (VCM)
Possible Values: 0 to Max Unit Air Flow
[See “Table 7. Max Unit Airflows" on page
90” in the Setpoints Section]
• Press Next/Previous keys to navigate.
VCM CO
2
Level Input 1512 PPM
Used With: Units w/Fresh Air
Measurement (VCM) w/DCV, or C02
Reset is ENABLED
Possible Values: 50 to 2000 PPM
• Press Next/Previous keys to navigate.
MPM Return Plenum Pressure Input 0.0 IWC
Screen shown only if unit with Return Fan
installed
Possible Values: -0.7 to 3.5 IWC
• Press Next/Previous keys to navigate.
End of Submenu (NEXT) to Enter STATUS
• Press Next/Previous keys to navigate.
GBAS (5VDC) MODULE STATUS SUBMENU SCREENS
GBAS (5VDC) Module Status Submenu
Press ENTER to View Data in This Submenu
Used With: Units w/GBAS (5VDC)
Installed
• Press the Next key to skip this Submenu.
To Next Page
Loading...
