CLCH-SVX07C-EN 41
Installation - Mechanical
4. Install 3/8-inch x 3/8-inch white butyl tape to flanged side of pipe cabinet wall and remove paper
backing from tape. See Figure 29.
5. Lift cabinet into place on to pipe cabinet curb.
6. Slide pipe cabinet tight up against the sidewall of the air handler.
7. Check pipe cabinet side walls to ensure they are plumb.
8. Apply a bead of caulk along the corner between the pipe cabinet and air handler wall prior to
installing connecting angle.
Figure 29. Pipe cabinet installation
To Next Page
Loading...
