CLCH-SVX07C-EN 77
Component Installation Requirements
When attaching a bypass duct to a downstream fan section or access section, the section will have
a factory-provided opening. (see Figure 66, Figure 67, and Figure 68.)
When bypassing into an access section, remove a panel. It is not necessary to cut an opening.
Figure 66. External face-and-bypass with duct configuration designed to bypass air into a
vertical fan section
Figure 67. External face-and-bypass with duct configuration designed to bypass air around one
coil
Duct
Fan
External
Face and Bypass
Coil
Fan
Coil
Coil
External
Face and Bypass
Duct
Access
To Next Page
Loading...
