Trane TEM4A0C48S41SC User Manual (English)

To Next Page

SSAAFFEETTYY WWAARRNNIINNGG

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning

equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person

could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that

are attached to the equipment.

July 2023

1188--GGFF7755DD11--11CC--EENN

Convertible Air Handlers

1–1/2 — 5 Ton

TEM4B0B24M21SA

TEM4A0B31M31SB

TEM4A0C42S41SC

TEM4B0C37M31SA

TEM4A0C43M41SB

TEM4A0C48S41SC

TEM4A0C49M41SB

TEM4B0C60S51SA

The TEM4 series air handler is designed for installation in a closet, utility

room, alcove, basement, crawlspace or attic. These versatile units are

applicable to air conditioning and heat pump applications. Several models

are available to meet the specific requirements of the outdoor equipment.

Field installed electric resistance heaters are available.

Installer’s Guide

Need help?

Do you have a question about the Trane TEM4A0C48S41SC and is the answer not in the manual?

Trane TEM4A0C48S41SC Specifications

General

Model	TEM4A0C48S41SC
Category	Air Handlers
Nominal Capacity (Tons)	4
CFM	1600
Voltage	208/230V
Refrigerant	R-410A
Phase	1
Cooling Capacity	48, 000 BTU/h
Air Flow	1, 600 CFM
Cabinet Type	Metal
Filter Type	Standard
Heating Capacity	48000 BTU/H