Trane TEM6A0C48H41SC - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
July 2022
1188--GGFF7744DD11--11RR--EENN
Convertible Air Handlers
2 — 5 Ton
TEM6A0B24H21SC
TEM6A0B30H21SC
TEM6A0C36H31SC
TEM6A0C42H41SC
TEM6A0C48H41SC
TEM6B0C60H51SA
The TEM6 series air handler is designed for installation in a closet,
utility room, alcove, basement, crawlspace or attic. These versatile
units are applicable to air conditioning and heat pump
applications. Several models are available to meet the specific
requirements of the outdoor equipment. Field installed electric
resistance heaters are available.
Installer’s Guide

Trane TEM6A0C48H41SC Specifications

General

Model Number	TEM6A0C48H41SC
Category	Air Handlers
Refrigerant	R-410A
Nominal CFM	1600
Motor Type	Variable Speed ECM
Phase	1
Cabinet Construction	Galvanized Steel
Filter Size	20x25x1 in.
Coil Type	Aluminum
Cooling Capacity	48, 000 BTU/h
Heating Capacity	48000 BTU/H
Voltage	208/230V
Cabinet Insulation	Foil-faced
Depth	21 in.

Summary

Safety Section

General Safety Warnings

Covers hazardous voltage, grounding, refrigerant, sharp edges, vapors, and coil pressure.

Unit Features and Operation

Blower and Airflow Adjustment

Information on the variable-speed blower, ECM fan control, and dip switch adjustments for airflow.

Wiring, Air Filter, and Thermostat

Sequence of Operation and Defrost

Explains system modes, including cooling, heating, and defrost sequences.

Operational Checkout and Maintenance

Field Wiring Diagrams

Single-Stage Wiring Diagrams

Wiring diagrams for single-stage cooling only and heat pump systems.

Two-Stage Wiring Diagrams

Wiring diagrams for two-stage cooling only and heat pump systems.

Electrical Data and Schematics

Wiring Schematic and Legend

Coil Conversion Instructions

Downflow Conversion Procedure

Horizontal Right Conversion Procedure

Installation Checkout Procedures

System Checkout Checklist

A comprehensive checklist to verify proper installation and system functionality.