Trane TEM6A0B24H21SC User Manual (English)

To Next Page

SSAAFFEETTYY WWAARRNNIINNGG

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning

equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person

could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that

are attached to the equipment.

July 2022

1188--GGFF7744DD11--11RR--EENN

Convertible Air Handlers

2 — 5 Ton

TEM6A0B24H21SC

TEM6A0B30H21SC

TEM6A0C36H31SC

TEM6A0C42H41SC

TEM6A0C48H41SC

TEM6B0C60H51SA

The TEM6 series air handler is designed for installation in a closet,

utility room, alcove, basement, crawlspace or attic. These versatile

units are applicable to air conditioning and heat pump

applications. Several models are available to meet the specific

requirements of the outdoor equipment. Field installed electric

resistance heaters are available.

Installer’s Guide

Need help?

Do you have a question about the Trane TEM6A0B24H21SC and is the answer not in the manual?

Trane TEM6A0B24H21SC Specifications

General

Model Number	TEM6A0B24H21SC
Category	Air Handlers
Voltage	208/230 V
Phase	1
Minimum Circuit Ampacity	15 A
Motor Type	ECM
Cabinet Insulation	R-4.2
Shipping Weight	130 lbs
Refrigerant	R-410A
Nominal Cooling Capacity	24000 BTU/hr
Nominal Heating Capacity	24, 000 BTU
Width	21 inches
Motor HP	1/3 HP