6
UNIT INSPECTION
UNIT INSPECTION
A closely followed maintenance program will help to keep your Thermo King unit in top operating condition.
The following service guide table should be used as a guide when inspecting or servicing components on this unit.
If a unit has been carrying cargo which contains a high level of sulphor or phosphorous (e.g. garlic, salted fish etc.), it is recommended that
clean evaporator coil after each trip.
Pretrip Inspect These Items
Electrical
• Perform a controller pretrip inspection (PTI) check.
• Visually check condenser fan and evaporator fan.
• Visually inspect electrical contacts for damage or loose connections.
• Visually inspect wire harnesses for damage or loose connections.
Refrigeration
• Check refrigerant charge.
Structural
• Visually inspect unit for damaged, loose or broken parts.
• Tighten unit, compressor and fan motor mounting bolts.
To Next Page
Loading...
