28
TK 56700-1-IM-EN
Condensing Unit Installation Components
NNoottee:: The following installation components are provided to complete a standard condensing unit installation.
Customer ordered options are not shown.
1. Nut-Blind
2. Screw, 1/4”–20
3. Flat Washer, 1/4”
4. Lock Washer, 1/4”
5. Fuel Fittings
6. Insulated Clamps
7. Clamp
8. Exhaust Pipe Extension
9. Check Valve
10. Terminal Lug, 3/8” 2 AWG
11. Terminal Lug, 3/8” red
12. Fuel Pump
13. Fuel Pump Mounting Bracket
14. Screw, 1/4”–20
15. Lock Nut, 1/4”-20
16. Fuel Pickup Tube Assembly
17. Clip
18. Fuse, In-line 60 Amp
19. Flat Washer #10
20. Screw, #10
21. Screw, #8
22. Washer, #8
23. DIN Bracket
24. Washer, 2” OD
25. Premium HMI Harness Adapter
26. HMI In-Cab Mounting Brackets
27. Premium HMI Controller
28. Operator’s Manual QR Code Nameplate
29. Warning Nameplate
To Next Page
Loading...
