Trane TR1 6016 - Page 92

92
621 - 631 Nameplate
Value:
Parameter Description Display text
Number Nameplate:
621 Unit Type (DRIVE TYPE)
622 Power Component (POWER SECTION)
623 TR1 Ordering No. (ORDERING NO)
624 Software Version No. (SOFTWARE VERSION)
625 Control Panel Identification No. (LCP ID NO.)
626 Database Identification No. (PARAM DB ID)
627 Power Component Identification No. (POWER UNIT DB ID)
628 Application Option Type (APPLIC. OPTION)
629 Application Option Ordering No. (APPLIC. ORDER NO)
630 Communication Option Type (COM. OPTION)
631 Communication Option Ordering No. (COM. ORDER NO)
Function:
Identification information for the drive can be read from parameters 621
through 631, Nameplate via the display or the serial communication
port.
Description of choice:
Parameter 621, Nameplate: Unit Type:
TR1 type gives the unit size and input voltage. See Cross Reference -
Model Number to TR1 Type to convert this do the drives model
number.
Parameter 622, Nameplate: Power Component:
This gives the type of power card installed in the drive.
Parameter 623, Nameplate: TR1 Ordering Number:
This gives the ordering number for the specific drive. Because this
number does not specify any special options or programming that was
provided with the drive, it is better to refer to the serial number printed
on the Trane nameplate when contacting the factory about the drive.
Parameter 624, Nameplate: Software Version Number:
This gives the present software version number of the drive.
Parameter 625, Nameplate: LCP Identification Number:
This gives the identification number of the keypad (LCP) of the unit.
Parameter 626, Nameplate: Database identification Number:
This gives the identification number of the softwares database.
Parameter 627, Nameplate: Power Component Identification
Number:
This gives the identification number of the database of the drive.
Parameter 628, Nameplate: Application Option Type:
This gives the type of application options fitted to the basic drive.
Parameter 629, Nameplate: Application Option Ordering
Number:
This gives the ordering number for the application option of the basic
drive. Because this number does not specify any special options or
programming that was provided with the drive, it is better to refer to the
serial number printed on the Trane nameplate when contacting the
factory about the drive.
Parameter 630, Nameplate: Communication Option Type:
This gives the type of communication option card installed in the drive, if
any.
Parameter 631, Nameplate: Communication Option Ordering
Number:
This gives the ordering number for the communication option.