2.3 Menus
2.3.1 Status Menu
In the Status menu, the selection options are:
•
Motor frequency [Hz], parameter 16-13 Frequency.
•
Motor current [A], parameter 16-14 Motor current.
•
Motor speed reference in percentage [%],
parameter 16-02 Reference [%].
•
Feedback, parameter 16-52 Feedback[Unit].
•
Motor power parameter 16-10 Power [kW] for kW,
parameter 16-11 Power [hp] for hp. If
parameter 0-03 Regional Settings is set to [1] North
America, motor power is shown in hp instead of
kW.
•
Custom readout parameter 16-09 Custom Readout.
•
Motor Speed [RPM] parameter 16-17 Speed [RPM].
2.3.2 Quick Menu
Use the Quick Menu to program the most common
functions. The Quick Menu consists of:
•
Wizard for open-loop applications. See
Illustration 2.4 for details.
•
Wizard for closed-loop applications. See
Illustration 2.5 for details.
•
Motor set-up. See Table 2.6 for details.
•
Changes made.
The built-in wizard menu guides the installer through the
set-up of the frequency converter in a clear and structured
manner for open-loop applications, closed-loop
applications, and quick motor settings.
Illustration 2.2 Frequency Converter Wiring
The wizard is displayed after power-up until any parameter
has been changed. The wizard can always be accessed
again through the quick menu. Press [OK] to start the
wizard. Press [Back] to return to the status view.
Illustration 2.3 Start-up/Quit Wizard
Programming Programming Guide
BAS-SVP16B-EN 02/2017 All rights reserved. 9
2
To Next Page
Loading...
