Trane TR170 - Table of Contents

Contents
1 Introduction
3
1.1 Purpose of the Manual
3
1.2 Document and Software Version
3
1.3 Safety Symbols
3
1.4 Safety Precautions
3
1.5 Additional Resources
4
1.6
Denitions
5
1.7 Electrical Overview
7
2 Programming
8
2.1 Introduction
8
2.2 Local Control Panel (LCP)
8
2.3 Menus
9
2.3.1 Status Menu 9
2.3.2 Quick Menu 9
2.3.3 Main Menu 23
2.4 Quick Transfer of Parameter Settings between Multiple Frequency Converters
23
2.5 Readout and Programming of Indexed Parameters
24
2.6 Initialization to Default Settings
24
3 Parameters
25
3.1 Main Menu - Operation and Display - Group 0
25
3.2 Main Menu - Load and Motor - Group 1
29
3.3 Main Menu - Brakes - Group 2
39
3.4 Main Menu–Reference/Ramps–Group 3
41
3.5 Main Menu - Limits/Warnings - Group 4
44
3.6 Main Menu - Digital In/Out - Group 5
47
3.7 Main Menu - Analog In/Out - Group 6
55
3.8 Main Menu - Communications and Options - Group 8
60
3.9 Main Menu - Smart Logic - Group 13
65
3.10 Main Menu - Special Functions - Group 14
73
3.11 Main Menu - Drive Information - Group 15
77
3.12 Main Menu - Data Readouts - Group 16
79
3.13 Main Menu - Data Readouts 2 - Group 18
83
3.14 Main Menu - FC Closed Loop - Group 20
84
3.15 Main Menu - Application Functions - Group 22
86
3.16 Main Menu - Application Functions 2 - Group 24
92
3.17 Main Menu - Special Features - Group 30
95
4 Troubleshooting
96
Contents Programming Guide
BAS-SVP16B-EN 02/2017 All rights reserved. 1