6-92 Terminal 42 Digital Output
Option: Function:
[25] Reverse
[26] Bus OK
[35] External Interlock
[36] Control word bit 11
[37] Control word bit 12
[41] Below reference, low
[42] Above ref, high
[45] Bus Control
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic rule 0
[71] Logic rule 1
[72] Logic rule 2
[73] Logic rule 3
[74] Logic rule 4
[75] Logic rule 5
[80] SL digital output A
[81] SL digital output B
[82] SL digital output C
[83] SL digital output D
[160] No alarm
[161] Running reverse
[165] Local ref. active
[166] Remote ref. active
[167] Start command activ
[168] Drive in hand mode
[169] Drive in auto mode
[190] No-Flow
[193] Sleep Mode
[194] Broken Belt Function
[196] Fire Mode
[198] Drive Bypass
6-93 Terminal 42 Output Min Scale
Range: Function:
0 %
*
[0 -
200 %]
Scale for the minimum output (0 mA or 4 mA)
of the analog signal at terminal 42. Set the
value to be the percentage of the full range
of the variable selected in parameter 6–
91 Terminal 42 Analog Output.
6-94 Terminal 42 Output Max Scale
Range: Function:
100
%
*
[0 -
200 %]
Scale for the maximum output (20 mA) of the
scaling at terminal 42. Set the value to be the
percentage of the full range of the variable
selected in parameter 6–91 Terminal 42 Analog
Output.
Illustration 3.12 Output Maximum Scale
6-96 Terminal 42 Output Bus Control
Range: Function:
0
*
[0 - 16384 ] Hold the analog output at terminal 42 if
controlled by bus.
Parameters Programming Guide
BAS-SVP16B-EN 02/2017 All rights reserved. 59
3
To Next Page
Loading...
