BAS-SVN208G-EN 13
Step 13: System Controller Setup
Figure 9. HVAC-only area and HVAC lighting area
Changeover Systems
Create a Variable Air system
1. Click the Enable Changeover checkbox.
2. Select either Variable Air System or Constant Volume Air System.
3. Enable the optional Optimization functions and click Next.
Figure 10. Create VAS
Note: Duct Static Optimization is not supported for Constant Volume systems.
4. Select the Air Handler, VAV boxes, and Ventilation members. Ensure that you do not
have the Constant Volume AHU in an area.
5. Check the appropriate boxes for tagging and priority heat. See System Controller
online help for more information.
To Next Page
Loading...
