Trane TZEMT400 - System Setup and Configuration; System Settings at Thermostat

12
17
If your System Type is:
• Gas Furnace - Single Stage, go to step 19
• Gas Furnace - Multistage, perform step 18A
• Electric Furnace, perform step 18B
• Heat Pump, perform step 18C
ÎÎ Note: It may be necessary to go back and review step 3 in the installation section to verify the differences between the system types.
16
Set Time and Date
a. Press the Menu button twice.
MENU button
MENU MODE FAN RUN
75
76 H
74 C
11:15 AM
b. Scroll up or down to UserÎSettings (it is the first option),
then press the Select button.
Done
Select
Menu Selection
User Settings
Usage Graph
ESM Setpoints
ZWave Install
Select button
Scroll
up
Scroll
down
c. Scroll up or down to SetÎClock (it is the first option), then
press the Select button.
Done
Select
User Settings
Set Clock
Filter Service
Maint Service
Screen Timeout
Select button
Scroll
up
Scroll
down
d. Press  or  to highlight the data you want to change.
e. Scroll up or down (+ or -) to make changes.
f. Press the Set button when you are finished.
g. Press the Done button twice to exit the menu.
Set button
Scroll
up
Scroll
down
Back
Set Clock
Set
Time 10 :15 AM
Date 3 / 23 / 09
Day Mon
System Settings at Thermostat