32-5093-04-EN page 11
Completed
Pending
Pending
Pending
Pending
Pending
Pending
15%
The User Setup Wizard guides you through the
XL1050’s User congurable settings.
To complete the Setup Wizard and connect the
XL1050 to Nexia Smart Home Systems, you need
the following:
• Internet service
• Your Wi-Fi network name and password
• An internet browser
• A valid email address
To access the User Setup Wizard, select
MENU>SETTINGS>USER SETUP WIZARD.
User Setup
Wizard
Settings
Menu
User Setup Wizard
The User Setup Wizard will guide you through
the following screens:
1. Display
2. Screen Layout
3. Scheduling
4. (A) Guided Schedules OR (B) 1-Touch Presets
5. Network
6. Nexia
7. Weather
Note: You may skip any section of the Wizard by
pressing Cancel. It is not possible to exit or go
back to a completed section after starting the
process.
After each step, the Wizard will show your
progress. Press Next to begin the next section.
Any settings can be changed at a later date
either manually, or by running this Wizard
again.
?
TIP
To Next Page
Loading...
