Trane TZON1050AC52ZA - Configuring 1-Touch Presets

32-5093-04A-EN page 9
75º
70º
Away
Home
Sleep
Heat to
Cool to
Press to
increase
the
set point
Press to
decrease
the
set point
Cooling Set Point
(press to change)
Press Away, Home or Sleep
to set Cooling & Heating
setpoints for each preset
Heating Set
Point (press to change)
Status Area
Away Preset
Temperatures
Mode
Indicator
1-Touch Presets provide predetermined Set
Points for Home, Away and Sleep time periods.
Note: 1-Touch Presets requires Scheduling
to be disabled. To disable Scheduling, go to
MENU>SCHEDULES and select DISABLE.
When scheduling is disabled, heating and
cooling set points are maintained indenitely.
When a temperature change is desired, the user
must manually adjust the temperature to the
new setting.
Conguring 1-Touch Preset
1. Press the PRESET button from the home
screen
(If a Preset is not selected it will display OFF) .
Preset
Off
2.
4:19 PM
Wed, Jul 13
Edit
Apply
Cancel
Home Away Sleep
To edit the parameters, press the EDIT
button, and rst, select AWAY.
3. To change the Cooling Set Point, press the
blue COOLING SET POINT to activate the
setting. The current System Mode indicator
will display blue wavy lines.
Use the UP and DOWN Arrows to adjust
the Set Point to the desired
temperature.
4. To change the Heating Set
Point, press the red HEATING
SET POINT area to activate
the setting. The current
System Mode indicator will
display red wavy lines.
Use the UP and DOWN
Arrows to adjust the Set Point
to the desired temperature.
5. Repeat the process for Home
and Sleep settings.
6. When editing is complete,
press APPLY.
7. Choose the desired preset and press
APPLY. The preset temperature settings
will be displayed on the Home Screen. The
selected preset will display at bottom right:
8.
Home
Preset
Default + Presets
2