EasyManua.ls Logo

Trane WSC120E - General Information

Trane WSC120E
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RT-SVX23E-EN 7
Model Number Descriptions
Model Number Notes
1. Available on 3-5 Ton Models.
2. Manual outside air damper will
ship factory supplied within the
unit, but must be field installed.
3. High pressure control is standard
on all units.
4. Multispeed direct drive standard
on single-phase products. Belt
drive standard on three-phase 3-
7½ ton. Variable speed direct drive
standard on 10 ton.
5. Economizer with Barometric
Relief is for downflow configured
units only. Order Economizer
without Barometric Relief for
horizontal configuration.
Barometric Relief for horizontal
configured units must be ordered
as field installed accessory.
6. Through the base electric required
when ordering disconnect/circuit
breaker options.
7. Requires use of Disconnect or
Circuit Breaker.
8. Standard metering devices are
TXVs.
9. The return air smoke detector may
not fit up or work properly on the
units when used in conjunction
with 3rd party accessories such as
bolt on heat wheels, economizers
and power exhaust. Do not order
the return air smoke detectors
when using this type of accessory.
10. Requires hinged access panels.
11. Crankcase heaters are only
available as option on WSC036E,
WSC048E1, & WSC060E1. CCH are
standard on all other units.

Other manuals for Trane WSC120E

Related product manuals